   {"version":"1.0","provider_name":"K\u00fchling&K\u00fchling","provider_url":"http:\/\/kuehlingkuehling.de","author_name":"wigital-kr","author_url":"http:\/\/kuehlingkuehling.de\/author\/wigital-kr\/","title":"home","type":"rich","width":600,"height":338,"html":"

     home<\/a><\/blockquote>\n
   
   
   
   
   
   
   
   

     • skip to content

                                     

  User Tools

     • Log In

  Site Tools

   _____________________ Search
   [_______________]>

     • Recent Changes
     • Media Manager
     • Sitemap

   Trace: • start

   ══════════════════════════════════════════════════════════════════════════

   start
   Translations of this page^?:

     • English
     • Deutsch

  Table of Contents

     • Official Documentation Repository for Kühling&Kühling Products

          • VP75
          • HT500
          • RepRap Industrial
          • RepRap Industrial v0 (development prototype)

         Official Documentation Repository for Kühling&Kühling Products

   Kühling&Kühling is an Open Source Hardware company by Jonas Kühling and
   Simon Kühling. Here you find a collection of all documentation resources
   for our products.

VP75

   The VP75 Additive Manufacturing System is a large scale, high volume
   production unit. The Open Source Hardware machine is developed and
   manufactured by Kühling&Kühling.
   For all questions not answered with these pages, you can always contact us
   directly.

   In the following you find the official documentation and all further
   product-related information about the VP75:

   Initial Commissioning Guide ☛

   General
   Safety
   Description
   Transport and installation
   Initial commissioning
   Operation
   Service Guide
   Downloads
   Troubleshooting
   Knowledge base
   Technical Data

   Buy the VP75

   ══════════════════════════════════════════════════════════════════════════

HT500

   The HT500 3D printer is an Open Source Hardware machine developed and
   manufactured by Kühling&Kühling.
   For all questions not answered with these pages, you can always contact us
   directly.

   In the following you find the official documentation and all further
   product-related information about the HT500:

   Initial Commissioning Guide ☛

   Manual
   Service Guide
   Troubleshooting
   Knowledge base
   Technical Data
   Quick Start Guide

   

   Buy the HT500

   ══════════════════════════════════════════════════════════════════════════

RepRap Industrial

   The RepRap Industrial 3D printer is an Open Source Hardware machine
   developed and manufactured by Kühling&Kühling.
   For all questions not answered with these pages, you can always contact us
   directly.

   New here?

   Find a detailed first steps guide here
   (initial commissioning information) 

   In the following you find the official documentation and all further
   product-related information about the RepRap Industrial:

     • Quick Start Guide
     • Manual
     • Technical Data
     • Service Guide
     • Troubleshooting
     • Knowledge base
     • Software & Firmware Upgrades

   ══════════════════════════════════════════════════════════════════════════

   

RepRap Industrial v0 (development prototype)

   At the beginning of 2013 Kühling&Kühling demonstrated a pre-production
   prototype of the RepRap Industrial at FabCon.3D tradeshow in
   Erfurt/Germany and started to accept pre-orders on the final series
   production model.

   This revision was not actually manufactured, so these pages are for
   historical reference only.

     • Overview (Pictures, Specifications, Features)

   start.txt · Last modified: 2017/01/20 15:47 by Simon Kühling

   ══════════════════════════════════════════════════════════════════════════

  Page Tools

     • Show pagesource
     • Old revisions
     • Backlinks
     • Export to PDF
     • Back to top

   Except where otherwise noted, content on this wiki is licensed under the
   following license: Creative Commons Attribution-ShareAlike 4.0
   International License
   Creative Commons Attribution-ShareAlike 4.0 International License Donate
   Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                 Discover the new Kühling&Kühling product line!

   VP75

  VP75 Additive Manufacturing System

   Our new large scale, high volume production unit. Processing
   engineering-grade materials in small- to mid-scale batches has never been
   as straightforward and economic.

   Request a Quote More

   HT500.2

  HT500.2 3D Printer

   Introducing the 2nd generation of our proven 3D printer for engineering,
   research and development.

   Request a Quote More

                                    Contact

  Call Us:

   +49 431 98 35 24 73 – 0

   Daily from 9.00 am to 4.00 pm CET

  Mail Us:

   sales@kuehlingkuehling.de

  Newsletter

   Email * _____________________ _____________________

   [ Subscribe! ]

                                 Our Customers

   logo_siemens
   logo_uni-tuebingen
   logo_zhaw
   logo_fraunhofer-ifam
   logo_alpha-xrt
   titk_logoclaim_de

                                      News

   All posts
   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                                    Imprint

   You are here:

    1. Home
    2. Imprint

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Local Court: Amtsgericht Kiel
   Commercial Register No.: HRB 17535
   Managing Directors: Jonas Kühling, Simon Kühling, Karsten Wenige
   VAT Reg.No.: DE305873054

   Contact
   General Inquiries: office@kuehlingkuehling.de
   Sales Department: sales@kuehlingkuehling.de
   Customer Care: care@kuehlingkuehling.de
   Technical Support: support@kuehlingkuehling.de
   Phone: +49 (0) 431 98 35 24 73 – 0
   Fax: +49 (0) 431 98 35 24 16

   Contact Us

   call5 +49 431 98 35 24 73 - 0

   mail20 sales@kuehlingkuehling.de

   About us

   Kühling&Kühling is an open source hardware company founded 2012 by Jonas
   Kühling and Simon Kühling. Read more...

   Twitter

     • RT @toms3dp: Overengineered? Naw, just like it's supposed to be done
       from a German's point of view! @FabCon3D w @kuehlingcompany
       https://t.… 6 days ago retweeted via toms3dp
     • RT @toms3dp: Brought the wrong camera charger, so I'm having an
       emergency phone to tripod adapter printed by @Kuehlingcompany here at
       @FabC… 1 week ago retweeted via toms3dp
     • #rapidtech trade fair in Erfurt/Germany is open - meet us at booth
       2-309! https://t.co/k9TVSvD8Gq 2 weeks ago
     • All phones are back online again - thank you very much for your
       patience! 4 months ago
     • Unfortunately our telephone line is temporarily down since 11:30 am.,
       but we are available via e-mail nonetheless! sales@kuehlingkuehling.de
       4 months ago
     • RT @wolffpeter: Heute #startuptour mit @c_lindner in Kiel. Danke an
       @kuehlingcompany #AdditiveManufacturing #greatcompany
       https://t.co/qlLJ… 4 months ago retweeted via wolffpeter
     • We're launching our new VP75 Additive Manufacturing System live on
       @formnext_expo this week! #formnext16 https://t.co/yy4PQDZmbZ 8 months
       ago
     • Polycarbonate from @Polymaker_3D (PC Plus) breaks like a molded part
       when printed on a HT500 3D printer #insane https://t.co/Et4DUqrQoH 1
       year ago

   Follow kuehlingcompany on Twitter

   Subscribe to our Newsletter

   Email * _____________________ _____________________

   [ Subscribe! ]
   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                             Data Privacy Statement

   You are here:

    1. Home
    2. Data Privacy Statement

   This is our german Data Privacy Statement. An english translation is
   attached below.

  Datenschutzerklärung

   Wir, Kühling&Kühling GmbH, Christianspries 30, 24159 Kiel, –
   – nachstehend Unternehmen genannt – beachten die Regeln der
   Datenschutzgesetze und nehmen daher auch in Ihrem Interesse den Schutz
   Ihrer persönlichen Daten ernst. Personenbezogene Daten werden daher durch
   uns nur im technisch notwendigen Umfang erhoben, so z.B. für die
   Vertragsabwicklung. In keinem Fall werden die erhobenen Daten außerhalb
   unseres Unternehmens verwendet, verkauft oder anderweitig Dritten – soweit
   es nicht für die Vertragsdurchführung unerlässlich ist – weitergegeben.

   Wir weisen darauf hin, dass unsere Server Log Files Informationen erheben
   und speichern, die Ihr Browser (an uns) übermittelt. Dies sind:
   – Browsertyp/-version,
   – verwendetes Betriebssystem,
   – Referrer URL (die zuvor besuchte Seite),
   – Hostnahme des zugreifenden Rechners (IP-Adresse),
   – Uhrzeit der Serveranfrage.

   Diese Daten sind für die Mitarbeiter unseres Unternehmens nicht
   zugänglich.

   Personenbezogene Daten werden im Übrigen nur erhoben, wenn Sie uns diese
   im Rahmen Ihrer Warenbestellung, bei Eröffnung eines Kundenkontos (oder
   bei Registrierung für unseren Newsletter) freiwillig mitteilen. Wir
   verwenden die von Ihnen mitgeteilten Daten ohne ihre gesonderte
   Einwilligung ausschließlich zur Erfüllung und Abwicklung Ihrer Bestellung.
   Mit vollständiger Abwicklung des Vertrages und vollständiger
   Kaufpreiszahlung werden Ihre Daten für die weitere Verwendung gesperrt und
   nach Ablauf der steuer- und handelsrechtlichen Vorschriften gelöscht.

   Eine Weitergabe Ihrer Daten erfolgt an das mit der Lieferung beauftragte
   Versandunternehmen, soweit dies zur Lieferung der Waren notwendig ist. Zur
   Abwicklung von Zahlungen geben wir Ihre Zahlungsdaten an das mit der
   Zahlung beauftragte Kreditinstitut weiter.

   Sie haben jederzeit das Recht auf kostenfreie Auskunft über die bezüglich
   Ihrer Person gespeicherten Daten, deren Herkunft und Empfänger, die
   Berechtigung, Sperrung oder Löschung von Daten sowie den Widerruf
   erteilter Einwilligungen und den Zweck der Datenverarbeitung. Auskunft
   über die gespeicherten Daten gibt der Datenschutzbeauftragte unseres
   Unternehmens, Simon Kühling, Telefon +49 (0) 431 98352473-0, E-Mail
   office@kuehlingkuehling.de.

  English translation:

    

  Data Privacy Statement

   We, Kühling&Kühling GmbH, Christianspries 30, 24159 Kiel, – hereinafter
   referred to as company – adhere to the provisions of data privacy acts and
   take the protection of your personal information seriously. Personal data
   will be collected only to the extent technically necessary, e.g.
   processing of contracts. On no account will collected data be used outside
   our company, nor sold or otherwise handed to third parties unless
   expressly necessary for completion of the contract.

   Please note that our server log files will gather and store information
   transferred by your browser (to us). These are:
   – type/version of browser
   – used operating system
   – referrer URL (the site previously visited)
   – host name of the accessing computer (IP-address)
   – time of the server inquiry

   These data are not accessible by our company staff.

   Personal data will be collected only as far as you willingly provide them
   during the order process, when opening a customer account (or registering
   for our newsletter). We will use your data solely for the purpose of
   handling your order unless not expressly otherwise agreed upon. After
   contract completion and full payment has been received, your data will be
   blocked from further use and deleted after expiration of the terms set by
   tax and commercial laws.

   Data will be transferred to the transport company charged with the
   delivery to the extent necessary for delivery. For payment transactions we
   will transfer payment data to the credit institution charged by us.

   You have the right to be provided with information free of charge on
   personal data stored, its origin and recipient, the legal grounds for its
   storage, blocking or deletion of data and the revocation of permission
   given and the purpose for which the data is processed. Information on
   personal data stored will be given by our company’s’ data protection
   supervisor
   Simon Kühling, phone +49 (0) 431 98352473-0, e-mail
   office@kuehlingkuehling.de.

   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                               Request for Quote

   You are here:

    1. Home
    2. Request for Quote

   To receive your individual quotation as soon as possible please fill out
   the form below - we will get back to you immediately!

   In case you have any questions meanwhile, please do not hesitate to
   contact us directly any time via e-mail or phone:

                            +49 431 98 35 24 73 - 0
                           sales@kuehlingkuehling.de

   Company (required)
   _________________________________________

   Department
   _________________________________________

   Title
   _________________________________________

   First Name (required)
   _________________________________________

   Last Name (required)
   _________________________________________

   Address 1 (required)
   _________________________________________

   Address 2
   _________________________________________

   Zip Code (required)
   _________________________________________

   City (required)
   _________________________________________

   Country (required)
   _________________________________________

   Phone (required)
   _________________________________________

   Email (required)
   _________________________________________

   Website
   _________________________________________

   [ ]  Business? (required)

   Subject (required)
   [__________________________________]

   Number of products
   _________________________________________

   Additional Notes
   _________________________________________
   _________________________________________
   _________________________________________
   _________________________________________
   _________________________________________
   _________________________________________
   _________________________________________
   _________________________________________
   _________________________________________
   _________________________________________

   [ ]  I agree that my contact information may be shared with a local
   distribution partner that will contact me for an estimate (required)

   [ Send ]

   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                                 Shipping Costs

   You are here:

    1. Home
    2. Shipping Costs

   Unless indicated otherwise on the respective product page, shipping fees
   will occur for all items in our shop.

   To calculate the expected shipping rates for your order, add the desired
   items to the cart without obligation and view all available shipping
   options and their exact cost for the cart content by entering destination
   country and postal code via the “Calculate Shipping” link provided on the
   cart page.

   Selected products that will be forwarded as freight are only available via
   the “Request for Quote” feature of our online shop (button “Inquire”) and
   thus do not provide shipping rate calculation as mentioned above. Since
   shipping cost estimation needs to be handled manually for every individual
   inquiry here, please quickly fill out the quote form with your contact
   information and submit your inquiry to our sales team directly. We will
   get back to you with our quotation as soon as possible, including the
   detailed shipping costs to your destination.
   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                          General Terms and Conditions

   You are here:

    1. Home
    2. General Terms and Conditions

   These are our German General Terms and Conditions. An english translation
   is attached below.

  Allgemeine Geschäftsbedingungen

   Die nachstehenden Allgemeinen Geschäftsbedingungen (im folgenden: AGB)
   einschließlich der folgenden Zusatzbedingungen für Wiederverkäufer richten
   sich ausschließlich an Unternehmer i.S.d. § 14 BGB. Unser Waren- und
   Dienstleistungsangebot richtet sich ausschließlich an Unternehmer, nicht
   an Verbraucher i.S.d. § 13 BGB.

    1. Geltungsbereich

   Für alle Lieferungen von Kühling&Kühling GmbH gelten diese Allgemeinen
   Geschäftsbedingungen. Sämtliche – auch künftige – Lieferungen und
   Leistungen erfolgen ausschließlich unter Einbeziehung dieser AGB, sofern
   diese nicht im Einzelfall oder aufgrund einer Rahmenvereinbarung mit einem
   Kunden vertraglich abgeändert oder ausgeschlossen werden. Entgegenstehende
   oder abweichende Regelungen unserer Kunden sind für uns nicht verbindlich,
   es sei denn, dass wir ihnen im Einzelfall oder aufgrund einer
   Rahmenvereinbarung mit einem Kunden zugestimmt haben.

    2. Vertragspartner

   Der Kaufvertrag kommt zustande mit

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Deutschland

   Telefon +49 (0) 431 98 35 24 73 – 0
   Fax +49 (0) 431 98 35 24 73 16
   E-Mail office@kuehlingkuehling.de
   Web http://kuehlingkuehling.de

   Sie erreichen unseren Kundendienst für Fragen, Reklamationen und
   Beanstandungen werktags von 08:00 Uhr bis 16:00 Uhr
   unter der Telefonnummer +49 (0) 431 98 35 24 73 – 0
   sowie unter der Telefaxnummer +49 (0) 431 98 35 24 73 16
   sowie per E-Mail unter care@kuehlingkuehling.de.

    3. Angebot und Vertragsschluss

   3.1 Die Darstellung der Produkte im Online-Shop stellt aufgrund der
   begrenzten Produktionskapazitäten kein rechtlich bindendes Angebot des
   Verkäufers/ Anbieters, sondern eine Aufforderung zur Abgabe einer
   Bestellung dar. Der Kunde ist an einen von ihm abgegebenen Antrag uns
   gegenüber für einen Zeitraum von 1 Woche ab Zugang bei uns gebunden, falls
   er bei Abgabe des Antrages nichts anderes bestimmt. Ein Auftrag kommt erst
   dadurch zustande, dass wir den Antrag des Kunden durch schriftliche
   Bestätigung annehmen oder die Lieferung oder Leistung ohne vorherige
   schriftliche Annahmebestätigung ausführen. Erfolgt die Annahme durch uns –
   egal ob schriftlich oder durch Ausführung – nach Ablauf der 1-wöchigen
   Bindungsfrist, so gilt der Vertrag dennoch als zustande gekommen, wenn der
   Kunde nicht unverzüglich widerspricht.

   3.2 Soweit in unserem Shop ein sogenannter „Warenkorb“ angeboten und von
   Ihnen genutzt wird, weisen wir darauf hin, dass die von Ihnen in den
   Warenkorb eingefügten Artikel bei uns erst dann als „verkauft“ oder in
   ähnlicher Weise gekennzeichnet werden, wenn Sie mit dem Inhalt des
   Warenkorbes den Button „weiter zur Kaufabwicklung“ betätigen. Es kann
   deshalb vorkommen, dass die von Ihnen vormals in den Warenkorb eingefügte
   Ware nicht mehr verfügbar oder von uns überarbeitet worden ist. In unserem
   Webshop werden Ihnen die überarbeiteten Angebote oder (nicht mehr)
   verfügbaren Artikel angezeigt und geeignete Hilfen zur Löschung oder
   Änderung des Bestandes im Warenkorb bzw. zur Kaufabwicklung angezeigt. Ein
   rechtlich bindendes Angebot unsererseits liegt erst vor, wenn Sie mit dem
   verfügbaren oder unverändert bestehen bleibenden Warenbestand den Button
   „weiter zur Kaufabwicklung“ betätigen. Erst mit dem Anklicken des
   Bestellbuttons (oder des Buttons „kaufen“) geben Sie eine verbindliche
   Willenserklärung zur Bestellung der verfügbaren oder überarbeiteten
   Angebote ab.

   3.3 Über die Möglichkeit, Eingabefehler zu erkennen und zu korrigieren,
   wird an geeigneter Stelle gesondert hingewiesen.

    4. Preise und Versandkosten

   4.1 Die auf den Produktseiten genannten Preise weisen die gesetzliche
   Umsatzsteuer nicht aus. Sonstige Preisbestandteile sind benannt. Bei
   gebrauchten Waren/ Artikeln wird, sofern die gesetzlichen Voraussetzungen
   vorliegen, auf die Differenzbesteuerung und die anfallenden Steuern
   hingewiesen.

   4.2 Zusätzlich zu den angegebenen Preisen berechnen wir für die Lieferung
   Versandkosten. Die Versandkosten werden Ihnen auf den Produktseiten und
   auf der Bestellseite deutlich mitgeteilt, sofern dieses aufgrund der
   Waren, der Versandart und des Bestimmungslandes möglich ist. Im übrigen
   werden die Versandkosten individuell vereinbart.

   4.3 Für Verkäufe nach Deutschland und in Länder der Europäischen Union
   fallen keine weiteren Steuern oder Kosten an. Für Verkäufe in andere
   Länder oder Regionen können entsprechend den jeweiligen länderspezifischen
   Einfuhrbestimmungen zusätzliche Kosten (z.B. Einfuhrumsatzsteuer, Zölle
   etc. ) anfallen.

   4.4 Es gilt die „Zahlung per Vorkasse“ als vereinbart.

    5. Lieferung

   5.1 Soweit nicht bei einem Artikel etwas anderes angegeben ist und im
   Rahmen des Bestellvorganges eine entsprechende Versandoption angeboten
   wird, erfolgt die Lieferung weltweit.

   5.2 Die Lieferzeit innerhalb Deutschlands beträgt drei Werktage nach
   Zahlungseingang. Auf eventuell abweichende Lieferzeiten weisen wir auf der
   jeweiligen Produktseite hin. Die Lieferzeiten außerhalb Deutschlands
   werden zwischen den Parteien individuell vereinbart. Im Falle von
   Verzögerungen werden wir Sie unverzüglich über das Lieferdatum bzw. die
   Übergabe der Ware an den Spediteur informieren.

   5.3 Sollte das bestellte Produkt nicht rechtzeitig lieferbar sein (z.B.
   aufgrund Untergang oder Irrtum), informieren wir Sie hierüber
   unverzüglich. Es steht Ihnen in einem solchen Fall frei, auf ein
   vergleichbares Produkt zu warten (sofern dieses lieferbar ist) oder Ihre
   Bestellung zu stornieren. Bei einer Stornierung werden ggf. bereits
   erbrachte Gegenleistungen unverzüglich erstattet.

   5.4 Der Verkäufer ist zu Teillieferungen berechtigt, sofern diese für den
   Käufer zumutbar sind.

   5.5 Für Lieferungen innerhalb der EU verpflichtet sich der Käufer das
   Gelangen der Ware zu bestätigen (Gelangensbestätigung). Dies kann nach
   vorheriger Vereinbarung auch auf elektronischem Wege erfolgen. Sollte der
   Käufer dieser Pflicht nicht vor Ablauf von 3 Monaten nach Lieferung
   nachkommen, sind wir berechtigt, die aktuell in Deutschland gültige
   Umsatzsteuer in Rechnung zu stellen. Es obliegt dann dem Käufer, sich die
   gezahlte Umsatzsteuer im Zuge eines Umsatzsteuervergütungsverfahrens über
   seine Finanzbehörde zurückerstatten zu lassen.

    6. Zahlung

   6.1 Die Zahlung erfolgt „per Vorkasse“. Soweit aufgrund gesonderter
   Vereinbarung „Zahlung per Nachnahme“ möglich ist, wird dieses bei dem
   jeweiligen Angebot gesondert ausgewiesen.

   6.2 Bei Zahlung per Vorkasse nennen wir Ihnen unsere Bankverbindung in der
   Auftragsbestätigung und liefern die Ware unter Berücksichtigung der
   genannten Lieferzeit nach Zahlungseingang.

   6.3 Ein Recht zur Aufrechnung steht Ihnen nur dann zu, wenn Ihre
   Gegenansprüche unbestritten, rechtskräftig festgestellt, oder im
   Rechtsstreit entscheidungsreif sind oder es sich um Gegenansprüche gem. §
   320 BGB handelt.

   6.4 Sie können ein Zurückbehaltungsrecht nur ausüben, soweit die Ansprüche
   aus dem gleichen Vertragsverhältnis resultieren.

    7. Eigentumsvorbehalt

   7.1 Bis zur vollständigen Zahlung bleibt die Ware unser Eigentum. Gerät
   der Käufer mit der Zahlung länger als 10 Tage in Verzug, haben wir das
   Recht, vom Vertrag zurückzutreten und die Ware zurückzufordern.

   7.2 Der Käufer ist zur Weiterveräußerung der unter Eigentumsvorbehalt
   gelieferten Ware im gewöhnlichen Geschäftsverkehr berechtigt. In diesem
   Fall tritt der Käufer in Höhe des Rechnungswertes unserer Forderung
   bereits jetzt alle Forderungen aus einer solchen Weiterveräußerung, gleich
   ob diese vor oder nach einer evtl. Verarbeitung der unter
   Eigentumsvorbehalt gelieferten Ware erfolgt, an uns ab. Unbesehen unserer
   Befugnis, die Forderung selbst einzuziehen, bleibt der Käufer auch nach
   der Abtretung zum Einzug der Forderung ermächtigt. In diesem Zusammenhang
   verpflichten wir uns, die Forderung nicht einzuziehen, so lange und so
   weit Sie Ihren Zahlungsverpflichtungen nachkommen, kein Antrag auf
   Eröffnung des Insolvenz- oder ähnlichen Verfahrens gestellt ist und keine
   Zahlungseinstellung vorliegt. Insoweit die oben genannten Sicherheiten die
   zu sichernden Forderungen um mehr als 10 % übersteigen, sind wir
   verpflichtet, die Sicherheiten nach unserer Auswahl auf Ihr verlangen
   freizugeben.

    8. Gewährleistung

   8.1 Soweit die gelieferte Ware mangelhaft ist, sind Sie als Unternehmer
   i.S.d. § 14 BGB im Rahmen der gesetzlichen Bestimmungen berechtigt,
   Nacherfüllung in Form der Mangelbeseitigung oder Lieferung einer
   mangelfreien Sache zu verlangen. Das Wahlrecht über die Art der
   Nacherfüllung steht uns zu. Bei Fehlschlagen der Nacherfüllung sind Sie
   berechtigt, den Kaufpreis zu mindern oder vom Vertrag zurückzutreten.
   Voraussetzung für jegliche Gewährleistungsrechte ist, dass Sie alle nach §
   377 HGB geschuldeten Untersuchungs- und Rügeobliegenheiten ordnungsgemäß
   erfüllen. Die Verjährungsfrist von Gewährleistungsansprüchen für die
   gelieferte Ware beträgt außer im fall von Schadenersatzansprüchen – zwölf
   Monate ab Erhalt der Ware.

   8.2 Sind Artikel von uns als „defekt“ gekennzeichnet, sind Mängel, die dem
   Käufer zum Zeitpunkt des Vertragsschlusses bekannt sind, von der
   Gewährleistung ausgeschlossen.

   8.3 Der Einbau der von uns angebotenen Waren, insbesondere von
   Ersatzteilen, sollte durch uns oder durch eine Fachwerkstatt erfolgen. Wir
   haften nicht für Schäden, die durch den fehlerhaften Einbau dieser Waren
   durch Dritte entstehen.

   8.4 Mängelansprüche werden nicht anerkannt, wenn der Schaden darauf
   beruht, dass nach Versenden der Ware durch den Verkäufer, die Ware von
   Dritten repariert oder in sonstiger Weise bearbeitet wurde. Ebenfalls
   bestehen keine Ansprüche, wenn die Betriebsanleitung, die
   Herstellervorschriften oder sonstige allgemein bekannte Regeln nicht
   beachtet wurden oder die Ware für einen anderen Zweck als vorgesehen
   genutzt wurde.

    9. Haftung

   9.1 Wir haften uneingeschränkt nach den gesetzlichen Bestimmungen für
   Schäden an Leben, Körper und Gesundheit, die auf einer fahrlässigen oder
   vorsätzlichen Pflichtverletzung von uns, unseren gesetzlichen Vertretern
   oder unseren Erfüllungsgehilfen beruhen, sowie für Schäden, die von der
   Haftung nach dem Produkthaftungsgesetz umfasst werden. Für Schäden, die
   nicht von Satz 1 erfasst werden und die auf vorsätzlichen oder grob
   fahrlässigen Vertragsverletzungen sowie Arglist von uns, unseren
   gesetzlichen Vertretern oder unseren Erfüllungsgehilfen beruhen, haften
   wir nach den gesetzlichen Bestimmungen. In diesem Fall ist aber die
   Schadensersatzhaftung auf den vorhersehbaren, typischerweise eintretenden
   Schaden begrenzt, soweit wir, unsere gesetzlichen Vertreter oder unsere
   Erfüllungsgehilfen nicht vorsätzlich gehandelt haben. In dem Umfang, in
   dem wir bezüglich der Ware oder Teile derselben eine
   Beschaffenheitsgarantie abgegeben haben, haften wir auch im Rahmen dieser
   Garantie. Für Schäden, die auf dem Fehlen der garantierten Beschaffenheit
   beruhen, aber nicht unmittelbar an der Ware eintreten, haften wir
   allerdings nur dann, wenn das Risiko eines solchen Schadens ersichtlich
   von der Beschaffenheitsgarantie erfasst ist.

   9.2 Wir haften auch für Schäden, die durch einfache Fahrlässigkeit
   verursacht werden, soweit die Fahrlässigkeit die Verletzung solcher
   Vertragspflichten betrifft, deren Einhaltung für die Erreichung des
   Vertragszwecks von besonderer Bedeutung ist. Wir haften jedoch nur, soweit
   die Schäden typischerweise mit dem Vertrag verbunden und vorhersehbar
   sind.

   9.3 Eine weitergehende Haftung ist ohne Rücksicht auf die Rechtsnatur des
   geltend gemachten Anspruchs ausgeschlossen; dies gilt insbesondere auch
   für deliktische Ansprüche oder Ansprüche auf Ersatz vergeblicher
   Aufwendungen statt der Leistung.

   9.4 Soweit unsere Haftung ausgeschlossen oder beschränkt ist, gilt dies
   auch für die persönliche Haftung unserer Angestellten, Arbeitnehmer,
   Mitarbeiter, Vertreter und Erfüllungsgehilfen.

    10. Vertragssprache

   Die Vertragssprachen sind deutsch und englisch.

    11. Schlussbestimmungen

   11.1 Änderungen oder Ergänzungen dieser Geschäftsbedingungen bedürfen der
   Schriftform. Dies gilt auch für das Aufheben dieses
   Schriftformerfordernisses.

   11.2 Es gilt das Recht der Bundesrepublik Deutschland unter Ausschluss des
   UN-Kaufrechts.

   11.3 Erfüllungsort sowie ausschließlicher Gerichtsstand für alle
   Streitigkeiten aus oder im Zusammenhang mit diesem Vertrag ist Kiel.

   11.4 Sollten einzelne Bestimmungen dieses Vertrages unwirksam sein oder
   den gesetzlichen Regelungen widersprechen, so wird hierdurch der Vertrag
   im Übrigen nicht berührt. Die unwirksame Bestimmung wird von den
   Vertragparteien einvernehmlich durch eine rechtswirksame Bestimmung
   ersetzt, welche dem wirtschaftlichen Sinn und Zweck der unwirksamen
   Bestimmung am nächsten kommt. Die vorstehende Regelung gilt entsprechend
   bei Regelungslücken.

  Zusatzbedingungen für Wiederverkäufer

   Diese Zusatzbedingungen für Wiederverkäufer ergänzen die oben stehenden
   Allgemeinen Geschäftsbedingungen.

    1. Geltungsbereich

   Für alle Lieferungen von Kühling&Kühling GmbH gelten die Allgemeinen
   Geschäftsbedingungen und ergänzend diese Zusatzbedingungen für
   Wiederverkäufer (im folgenden zusammenfassend: AGB). Sämtliche – auch
   künftige – Lieferungen und Leistungen erfolgen ausschließlich unter
   Einbeziehung dieser AGB, sofern diese nicht im Einzelfall oder aufgrund
   einer Rahmenvereinbarung mit einem Kunden vertraglich abgeändert oder
   ausgeschlossen werden. Entgegenstehende oder abweichende Regelungen
   unserer Kunden sind für uns nicht verbindlich, es sei denn, dass wir ihnen
   im Einzelfall oder aufgrund einer Rahmenvereinbarung mit einem Kunden
   zugestimmt haben.

    2. Vertragspartner

   Der Kaufvertrag kommt zustande mit

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Deutschland

   Telefon +49 (0) 431 98 35 24 73 – 0
   Fax +49 (0) 431 98 35 24 73 16
   E-Mail office@kuehlingkuehling.de
   Web http://kuehlingkuehling.de

   Sie erreichen unseren Kundendienst für Fragen, Reklamationen und
   Beanstandungen werktags von 08:00 Uhr bis 16:00 Uhr
   unter der Telefonnummer +49 (0) 431 98 35 24 73 – 0
   sowie unter der Telefaxnummer +49 (0) 431 98 35 24 73 16
   sowie per E-Mail unter care@kuehlingkuehling.de.

    3. Registrierung als Wiederverkäufer

   Ein Antragsformular für die Autorisierung als Wiederverkäufer erhalten Sie
   auf Anfrage per E-Mail an sales@kuehlingkuehling.de.

    4. Preise, Skonti, Nachlässe und Versandkosten

   4.1 Die auf den Produktseiten genannten Preise weisen die gesetzliche
   Umsatzsteuer nicht aus. Sonstige Preisbestandteile sind benannt. Bei
   gebrauchen Waren/ Artikeln wird, sofern die gesetzlichen Voraussetzungen
   vorliegen, auf die Differenzbesteuerung und die anfallenden Steuern
   hingewiesen.

   4.2 Skonti und sonstige Nachlässe bedürfen einer ausdrücklichen vorherigen
   Vereinbarung. Eine Skonto- oder Nachlassvereinbarung kommt nicht dadurch
   zustande, dass wir in der Vergangenheit an den Kunden unter Gewährung von
   Skonti oder Nachlässen geliefert haben. Skonti oder Nachlässe sind
   vielmehr bei jedem Vertrag neu zu vereinbaren. Diese gilt nicht, soweit
   mit einem Kunden Skonti oder Nachlässe in einer Rahmenvereinbarung
   vereinbart wurden. Skonto- oder Nachlassvereinbarungen kommen auch nicht
   dadurch zustande, dass wir einem nicht vereinbarten Abzug des Kunden nicht
   widersprechen. Wenn ein Skonto vereinbart ist, so kann dieser nur
   beansprucht werden, wenn keine Zahlungsrückstände aus anderen Aufträgen
   bestehen.

   4.3 Zusätzlich zu den angegebenen Preisen berechnen wir für die Lieferung
   Versandkosten. Die Versandkosten werden Ihnen auf den Produktseiten und
   auf der Bestellseite deutlich mitgeteilt, sofern dieses aufgrund der
   Waren, der Versandart und des Bestimmungslandes möglich ist. Im übrigen
   werden die Versandkosten individuell vereinbart.

   4.4 Für Verkäufe nach Deutschland und in Länder der Europäischen Union
   fallen keine weiteren Steuern oder Kosten an. Für Verkäufe in andere
   Länder oder Regionen können entsprechend den jeweiligen länderspezifischen
   Einfuhrbestimmungen zusätzliche Kosten (z.B. Einfuhrumsatzsteuer, Zölle
   etc. ) anfallen.

   4.5 Es gilt die „Zahlung per Vorkasse“ als vereinbart.

    5. Lieferung

   5.1 Neben den Lieferbedingungen in unseren Allgemeinen
   Geschäftsbedingungen gilt folgendes:
   Wir sind berechtigt, Aufträge in Teillieferungen auszuführen, falls nichts
   anderes vereinbart ist. Der Wiederverkäufer kann die Annahme von
   Teillieferungen nur dann verweigern, wenn diese für ihn objektiv kein
   Interesse haben. Die Verweigerung der Annahme ist schriftlich zu erklären;
   mit der Verweigerung ist zugleich das mangelnde objektive Interesse
   schriftlich zu begründen.

   5.2. Erfolgen Teillieferungen auf Wunsch des Kunden, werden die hierdurch
   entstehenden Kosten dem Kunden gesondert berechnet; dies gilt auch, falls
   grundsätzlich (im Falle einer einmaligen Lieferung) keine gesonderte
   Berechnung von Frachtkosten vereinbart ist.

    6. Zahlung

   6.1 Die Zahlung erfolgt „per Vorkasse“. Soweit aufgrund gesonderter
   Vereinbarung „Zahlung per Nachnahme“ möglich ist, wird dieses bei dem
   jeweiligen Angebot gesondert ausgewiesen.

   6.2 Bei Zahlung per Vorkasse nennen wir Ihnen unsere Bankverbindung in der
   Auftragsbestätigung und liefern die Ware unter Berücksichtigung der
   genannten Lieferzeit nach Zahlungseingang.

   6.3 Ein Recht zur Aufrechnung steht Ihnen nur dann zu, wenn Ihre
   Gegenansprüche unbestritten, rechtskräftig festgestellt, oder im
   Rechtsstreit entscheidungsreif sind oder es sich um Gegenansprüche gem. §
   320 BGB handelt.

   6.4 Sie können ein Zurückbehaltungsrecht nur ausüben, soweit die Ansprüche
   aus dem gleichen Vertragsverhältnis resultieren.

    7. Schadenersatzansprüche des Kunden

   7.1 Soweit dem Kunden des Wiederverkäufers Schaden- oder
   Aufwendungsersatzansprüche wegen Mängeln zustehen, die nicht durch die
   vorstehenden Vereinbarungen oder Ziffer 7.2 ausgeschlossen sind, verjähren
   diese in 12 Monaten.

   7.2 Alle übrigen Schaden- oder Aufwendungsersatzansprüche des Kunden – mit
   Ausnahme der in Ziffer 7.3 benannten – gleich aus welchem Rechtsgrund,
   insbesondere wegen Verletzung von Pflichten aus Schuldverhältnissen oder
   unerlaubten Handlungen sind ausgeschlossen.

   7.3 Schadenersatzansprüche des Kunden sind nicht ausgeschlossen,
   hinsichtlich
   a) Schäden aus der Verletzung des Lebens, des Körpers oder der Gesundheit,
   die auf einer fahrlässigen Pflichtverletzung durch uns, einer
   vorsätzlichen oder fahrlässigen Pflichtverletzung unserer gesetzlichen
   Vertreter oder unserer Erfüllungsgehilfen beruhen
   b) Sonstiger Schäden, die auf einer grob fahrlässigen Pflichtverletzung
   durch uns oder auf einer vorsätzlichen oder grob fahrlässigen
   Pflichtverletzung unserer gesetzlichen Vertreter oder unserer
   Erfüllungsgehilfen beruhen.

    8. Garantien

   8.1 Sämtliche von uns getätigten Beschreibungen und sonstige Angaben, auch
   in Katalogen, Prospekten und Werbemitteln, sind grundsätzlich – soweit
   nicht ausdrücklich etwas anderes angegeben wird – nur Beschreibungen. Wir
   übernehmen mit solchen Beschreibungen keine Garantie für die
   Beschaffenheit der Ware oder dafür, dass die Ware für eine bestimmte Dauer
   eine bestimmte Beschaffenheit behält.

   8.2 Wenn wir in Abweichung von Ziffer 8.1 eine Garantie übernommen haben,
   so stehen dem Kunden im Falle von Mängeln, die der Garantie unterfallen
   (insbesondere bei einem Abweichen von der garantierten Beschaffenheit),
   die Gewährleistungsrechte im Rahmen und Umfang der Garantie zu.

  Hinweis zu den Informationspflichten über die einzelnen technischen Schritte,
  die zu einem Vertragsschluss führen, gem. § 312i Abs. 1 Nr. 1 BGB i.V.m. Art.
  246c Nr. 1 EGBGB

   Gemäß § 312i Abs. 1 Nr. 1 BGB in Verbindung mit Art. 246c Nr. 1 EGBGB sind
   wir verpflichtet, über die einzelnen technischen Schritte, die zu einem
   Vertragsschluss führen, zu informieren.

   Wir weisen darauf hin, dass das die Menüführung der in unserem Shop
   ersichtlichen Angebote durch Hinweise und/oder Buttons wie „weiter“ „zum
   Bestellvorgang“ selbsterklärend bis zum Abschluss des Bestellvorganges
   führt.

  Hinweis zu den Informationspflichten über die Speicherung des Vertragstextes
  gem. § 312i Abs. 1 Nrn. 2, 4 BGB i.V.m. Art. 246c Nr. 2 EGBGB

   Gemäß § 312i Abs. 1 Nrn. 2, 4 BGB in Verbindung mit Art. 246c Nr. 2 EGBGB
   sind wir verpflichtet darüber zu informieren, ob der Vertragstext nach dem
   Vertragsschluss von dem Unternehmer gespeichert wird und ob der
   Vertragstext dem Kunden zugänglich ist.

   Wir weisen darauf hin, dass das in unserem Shop ersichtlichen Angebote
   nach Abschluss des Bestellvorganges noch für 30 Tage gespeichert werden
   und über die URL http://kuehlingkuehling.de/order-tracking unter Eingabe
   der Bestellnummer (siehe die Bestellbestätigungs-E-Mail) sowie der im
   Rahmen der Bestellung verwendeten E-Mailadresse eingesehen und ausgedruckt
   werden kann. Nach Ablauf dieser Frist wird das Angebot endgültig aus dem
   Webshop genommen. Einen Ausdruck dieses Angebotes haben wir gespeichert.
   Dieser kann auch nach Ablauf der zuvor genannten Frist bei uns
   eingesehen/angefordert werden. Wir empfehlen gleichwohl allen Kunden,
   spätestens unmittelbar nach Vertragsschluss den Vertragstext/das Angebot
   auszudrucken.

   Hinsichtlich der von uns verwendeten Allgemeinen Geschäftsbedingungen
   (AGB) weisen wir unsere Kunden darauf hin, dass diese ständig aktualisiert
   werden. Die von uns verwendeten älteren AGB werden nach Überarbeitung
   nicht mehr gespeichert und sind bei uns lediglich in Form eines
   Belegexemplars vorhanden. Wir empfehlen unseren Kunden, unmittelbar nach
   Abschluss des Bestellvorganges die AGB auszudrucken.

  Hinweis zu der Informationspflicht über die Möglichkeit, Eingabefehler zu
  erkennen und zu korrigieren, gem.§ 312i Abs. 1 Satz 1 Nr. 1 BGB i.V.m. Artikel
  246c Nr. 3 EGBGB

   Wir weisen ausdrücklich darauf hin, dass die Eingaben grundsätzlich
   jederzeit, insbesondere auch nach Anklicken des Bestell-Buttons noch
   einmal überprüft werden können. Sie können Ihre Eingabe insbesondere
   dadurch korrigieren, dass Sie den Button “zurück” betätigen oder aber das
   zuletzt geöffnete Fenster schließen (durch Betätigen des Symbols „X“).

  Datenschutzerklärung

   Wir, die Kühling&Kühling GmbH, Christianspries 30, 24159 Kiel,
   Deutschland, – nachstehend Unternehmen genannt – beachten die Regeln der
   Datenschutzgesetze und nehmen daher auch in Ihrem Interesse den Schutz
   Ihrer persönlichen Daten ernst. Personenbezogene Daten werden daher durch
   uns nur im technisch notwendigen Umfang erhoben, so z.B. für die
   Vertragsabwicklung. In keinem Fall werden die erhobenen Daten außerhalb
   unseres Unternehmens verwendet, verkauft oder anderweitig Dritten – soweit
   es nicht für die Vertragsdurchführung unerlässlich ist – weitergegeben.

   Wir weisen darauf hin, dass der Server unserer Website automatisch Log
   Files Informationen erhebt und speichert, die Ihr Browser (an uns)
   übermittelt. Dies sind:
   – Browsertyp/-version,
   – verwendetes Betriebssystem,
   – Referrer URL (die zuvor besuchte Seite),
   – Hostnahme des zugreifenden Rechners (IP-Adresse),
   – Uhrzeit der Serveranfrage.

   Diese Daten sind für die Mitarbeiter unseres Unternehmens nicht
   zugänglich.

   Personenbezogene Daten werden im Übrigen nur erhoben, wenn Sie uns diese
   im Rahmen Ihrer Warenbestellung, bei Eröffnung eines Kundenkontos oder bei
   Registrierung für unseren Newsletter freiwillig mitteilen. Wir verwenden
   die von Ihnen mitgeteilten Daten ohne ihre gesonderte Einwilligung
   ausschließlich zur Erfüllung und Abwicklung Ihrer Bestellung. Mit
   vollständiger Abwicklung des Vertrages und vollständiger Kaufpreiszahlung
   werden Ihre Daten für die weitere Verwendung gesperrt und nach Ablauf der
   steuer- und handelsrechtlichen Vorschriften gelöscht.

   Eine Weitergabe Ihrer Daten erfolgt an das mit der Lieferung beauftragte
   Versandunternehmen, soweit dies zur Lieferung der Waren notwendig ist. Zur
   Abwicklung von Zahlungen geben wir Ihre Zahlungsdaten an das mit der
   Zahlung beauftragte Kreditinstitut weiter.

   Sie haben jederzeit das Recht auf kostenfreie Auskunft über die bezüglich
   Ihrer Person gespeicherten Daten, deren Herkunft und Empfänger, die
   Berechtigung, Sperrung oder Löschung von Daten sowie den Widerruf
   erteilter Einwilligungen und den Zweck der Datenverarbeitung. Auskunft
   über die gespeicherten Daten gibt der Datenschutzbeauftragte unseres
   Unternehmens, Herr Simon Kühling, Im Wiesengrund 23, 24113 Molfsee,
   Deutschland, Telefon +49 (0) 431 98 35 24 73 – 0, Fax +49 (0) 431 98 35 24
   73 16, E-Mail office@kuehlingkuehling.de.

  Hinweis zu den Verkaufsverpackungen

   Verkaufsverpackungen sind Verpackungen, die beim Endverbraucher anfallen
   (§ 3 Abs. 1Nr.2 Verpackungs-Verordnung). Hersteller oder Vertreiber der
   Produkte sind verpflichtet,
   – entweder die Verpackungsabfälle im Geschäft oder in der unmittelbaren
   Nähe unentgeltlich (§ 6 Abs. 1) zurückzunehmen (so genannte
   Selbstentsorger)
   – oder sich an einem flächendeckenden System zu beteiligen, das die
   Verpackungsabfälle beim privaten Endverbraucher oder in dessen Nähe abholt
   (sog. Duale Systeme)
   Sie können restentleerte Verkaufsverpackungen, der von uns verkauften Ware
   daher kostenlos an die im Impressum benannte Anschrift zurücksenden.

  Informationspflicht nach dem Batteriegesetz – BattG

   Gemäß dem Gesetz über das Inverkehrbringen, die Rücknahme und die
   umweltverträgliche Entsorgung von Batterien und Akkumulatoren
   (Batteriegesetz – BattG) vom 25.06.2009 (BGBl. I S. 1582) sind wir als
   Händler verpflichtet, über diesbezügliche Regelungen und Pflichten zu
   informieren. Zudem erhalten Sie die nach dem BattG vorgeschriebenen
   Hinweise mit der Warensendung.

   Von uns erhaltene Batterien können Sie uns nach Gebrauch unentgeltlich
   zurückgeben.

   Endverbraucher sind nach § 11 BattG zur Rückgabe verbrauchte Batterien
   gesetzlich verpflichtet, wobei sie weder nach Batterietyp noch nach
   Hersteller oder Verkäufer unterscheiden müssen.

   Batterien dürfen nicht über den normalen Hausmüll entsorgt werden, sondern
   müssen an den Vertreiber oder an von den öffentlich – rechtlichen
   Entsorgungsträgern dafür eingerichteten Rücknahmestellen zurückgegeben
   werden.

   Schadstoffhaltige Batterien sind mit einer durchgekreuzten Mülltonne
   gekennzeichnet. Darunter befindet sich die chemische Bezeichnung des
   Schadstoffs, “Cd” für Cadmium, ” Hg” für Quecksilber und “Pb” für Blei.

   Endverbraucher, die gewerbliche oder sonstige wirtschaftliche Unternehmen
   oder öffentliche Einrichtungen sind, können den Ort der Rückgabe mit dem
   gemeinschaftlichen Rücknahmesystem als auch mit Herstellern, die ein
   eigenes System eingerichtet haben, vereinbaren.

   © 2015 Rechtsanwalt Ralph J. Jurisch, 59387 Ascheberg/Westf., für
   www.webrecht-jurisch.de

  English translation:

    

  General terms and conditions

   The below stated general terms and conditions (in the following referred
   to as GTC) including the additional reseller conditions are only directed
   to business contractors as defined by §14 BGB. Our products and services
   exclusively apply to business contractors, excluding consumers as defined
   by §13 BGB.

    1. Scope

   All deliveries by Kühling&Kühling GmbH are subject to this GTC. All –
   including future – deliveries and services are always subject to the GTC,
   if not otherwise agreed upon or excluded individually or in the context of
   a master agreement with a customer. The GTC remain untouched by opposing
   or differing regulations of our customers without our explicit consent in
   an individual case or in the context of a master agreement.

    2. Contractors

   The sales contract is concluded with

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Phone +49 (0) 431 98 35 24 73 – 0
   Fax +49 (0) 431 98 35 24 73 16
   E-mail office@kuehlingkuehling.de
   Web http://kuehlingkuehling.de

   You can contact our customer service for questions, complaints and
   objections on workdays from 8:00am to 4:00pm
   by phone +49 (0) 431 98 35 24 73 – 0
   by fax +49 (0) 431 98 35 24 73 16
   or via email care@kuehlingkuehling.de.

    3. Quote and conclusion of the contract

   3.1 Due to the limited production capacities, products displayed in the
   online store do not represent a legally binding offer of the
   seller/supplier, but are an invitation to place a purchase order. The
   customer’s purchase order is considered binding for one week after receipt
   if not otherwise stated during the submission of the request form. A
   contract is only concluded with our written confirmation or if we choose
   to deliver goods or services without prior acknowledgement of receipt.
   After the commitment period of one week the contract is nevertheless
   considered concluded if we acknowledge it, either in written form or by
   execution, unless the customer does not contradict immediately.

   3.2 As far as our online shop provides a „shopping cart“ you choose to
   use, we like to emphasize that all products placed in the shopping cart
   are only considered as „sold“ after you acknowledged its contents via the
   „Proceed to checkout“ button. Therefor it may happen that products you
   have placed in the shopping basket earlier have meanwhile run out of stock
   or have been subject to change. Updated offers or no longer available
   articles will be displayed in the online shop and adequate help is
   provided to delete or change the contents of the shopping cart and to
   proceed with the purchase transaction. Our legally binding offer is only
   present after you have acknowledged the available or unchangedly existing
   stock via the „Proceed to checkout“ button. Only after clicking the
   purchase button (or the „buy“ button) you state a binding declaration of
   intending to order the available or the updated offers.

   3.3 The possibility to detect and correct input errors is noted
   separately.

    4. Prices and shipping costs

   4.1 The prices stated on the product sites do not indicate VAT. All other
   price elements are stated. If legally applicable, the margin scheme and
   taxes incurred are stated for used articles.

   4.2 In addition to the prices indicated we charge shipping costs. The
   shipping costs are indicated on the product pages as far as possible
   considering the kind of product, the shipping method and the destination
   country. In all other cases, shipping costs are agreed upon individually.

   4.3 Sales within Germany and countries of the European Union are not
   subject to further taxes and expenses. Sales to other  countries and
   regions may include additional costs (e.g. import sales tax, tariffs etc.)
   according to local import regulations.

   4.4 „Payment in advance“ is considered agreed.

    5. Delivery

   5.1 As far as not explicitly stated otherwise for a single article and no
   other shipping option is named during the ordering process, delivery will
   be effected worldwide.

   5.2 The delivery time within Germany is three working days after payment
   has been received. Perhaps deviating delivery times are noted on the
   respective product page. Delivery times for shipments outside Germany are
   individually agreed by the partners. In case of delay we will immediately
   notify you about the date of delivery and inform you about the handover of
   the goods to the forwarder.

   5.3 Should the ordered product not be available in time (e.g. due to
   overlook or error) we shall inform you immediately. In such case you are
   free to wait for a similar product (if available) or to cancel your order.
   If you choose to cancel the order, any consideration already paid will be
   refunded.

   5.4 The seller is entitled to make partial deliveries as far as it is
   acceptable for the customer.

   5.5 For deliveries within the EU (intra-community delivery) the buyer
   commits himself to confirm the arrival of the goods
   (Gelangensbestätigung). After prior agreement this can also be carried out
   electronically. In case the buyer does not fulfill this duty within 3
   months after delivery, we are entitled to invoice the VAT currently valid
   in Germany. It is then up to the buyer to get the VAT refunded through a
   VAT refund procedure of its local tax authority.

    6. Payment

   6.1 Payment is made by „payment in advance“. If „Payment on delivery“ has
   been agreed individually, this is stated in the accompanying quote.

   6.2 For payment in advance we will include our bank details in the order
   confirmation and will ship the products within the stated delivery time
   after we have received payment.

   6.3 You only have an enforceable right to offset in case that your
   counter-claims are undisputed, legally enforceable or ready for judgment
   or if they are in accordance with § 320 BGB.

   6.4 You only have a right of retention insofar the claims result from the
   same contractual relationship.

    7. Reservation of ownership

   7.1 All products remain our property until full payment has been received.
   In the case of the customer falling behind for more than 10 days, we have
   the right to withdraw from the contract and to reclaim the delivered
   goods.

   7.2 The buyer has the right to resale goods supplied under reservation of
   ownership during regular business activities. In this case, the buyer
   assigns all claims resulting from such activities to us, namely up to the
   actual invoiced amount, whether they have been processed prior to or after
   the goods have been delivered under reservation of ownership.
   Notwithstanding our right to collect the claims directly, the buyer is
   also entitled to collect the assigned claim. In this event we commit
   ourselves not to collect any claims as long and as far as you fulfill your
   payment obligations, have not filed a petition for the opening of
   insolvency or similar proceedings and payments have not been suspended. In
   case the above securities exceed the debt to be secured by more than 10%
   we are obliged to release the securities of our choice.

    8. Warranty

   8.1 In case the delivered good is defective you, being a company in the
   sense of § 14 BGB and within the statutory provisions, are entitled to
   alternative performance in the form of remedy of the defect or delivery of
   conforming goods. The choice of the kind of alternative performance
   remains with us. In the case of failure of the alternative performance,
   you are entitled to reduce the purchase price or to withdraw from the
   contract. To claim any warranty rights, it is mandatory that you fulfill
   all obligations with respect to the inspection and making of complaints
   about defects under § 377 HGB. The limitation period of warranty claims
   other than damage compensation claims for the delivered goods is limited
   to twelve month, starting with the receipt of the goods.

   8.2 If we have marked articles as „defective“, any deficiencies that have
   been known to the customer at the time of conclusion of the contract are
   excluded from warranty claims.

   8.3 The installation of goods we offer, especially spare parts, should be
   carried out by ourselves or a specialist workshop. We accept no liability
   for damages resulting from inappropriate installation by third parties.

   8.4 Deficiency claims will not be accepted if after an article has been
   shipped by the seller a damage occurs as a result of repair or any other
   modification by a third party. Also, all claims are rejected if the
   operating manual, the manufacturer’s instructions or any other known rules
   have not been observed are the article has been used for a purpose other
   than specified.

    9. Liability

   9.1 We assume liability in accordance with the legal requirements for
   damages of life, body and health caused by ourselves, our legal
   representatives’ or vicarious agents’ gross negligence or deliberation. We
   also assume liability for damages in compliance with the product liability
   law. For damages not covered by Sentence 1 and that are caused by
   deliberate or gross negligent breach of contract together with fraud by
   ourselves, our legal representatives’ or vicarious agents’ we assume
   liability in accordance with legal requirements. In this case compensation
   liability is limited to foreseeable, typically occurring damages unless we
   ourserlves, our legal representatives’ or vicarious agents’ may e accused
   of intent. We shall be liable to the scope of any quality guarantee
   granted for a product or parts thereof. For damages based on the absence
   of a guaranteed quality we shall only be liable if the risk of such a
   damage is evidently part of the quality guarantee.

   9.2 We shall also be liable for damages resulting from ordinary negligence
   if the negligence concerns breach of such contractual obligations that are
   vital to the contract fulfillment. However, we only accept liability
   insofar damages are typically connected to the contract and are
   foreseeable.

   9.3 Any further liability shall be excluded without regard to the legal
   nature of the asserted claim; this shall apply in particular to tort
   claims and claims to compensation of futile expenses instead of
   performance.

   9.4 In the event that our liability should be excluded or limited, same
   shall also apply to the personal liability of our office employees, our
   staff as a whole, our representatives and vicarious agents or
   subcontractors.

    10. Contract language

   The contract languages are German and English.

    11. Final provisions

   11.1 Alterations or amendments of these GTC shall be made in writing. This
   shall also apply for the above mentioned requirement for the written form.

   11.2 The law of the Federal Republic of Germany shall apply to the
   exclusion of the UN Sales Convention.

   11.3 Place of performance and exclusive place of jurisdiction for all
   disputes arising out of or in connection with this contract is Kiel,
   Germany.

   11.4 Should individual terms of this contract be inoperative or in
   conflict with legal provisions , this will not affect the remaining terms
   of this contract. The contracting parties will jointly replace the invalid
   term with a legally valid term which comes closest to the commercial
   purpose of the invalid term. The above provision applies in case of
   loopholes accordingly.

  Additional Reseller Conditions

   These Additional Reseller Conditions are supplement to the above General
   Terms and Conditions.

    1. Scope

   All deliveries by Kühling&Kühling GmbH are subject to the General Terms
   and Conditions and the Additional Reseller Conditions (generally referred
   to in the following as GTC). All – including future – deliveries and
   services are always subject to the GTC, if not otherwise agreed upon or
   excluded individually or in the context of a master agreement with a
   customer. The GTC remain untouched by opposing or differing regulations of
   our customers without our explicit consent in an individual case or in the
   context of a master agreement.

    2. Contractors

   The sales contract is concluded with

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Phone +49 (0) 431 98 35 24 73 – 0
   Fax +49 (0) 431 98 35 24 73 16
   E-mail office@kuehlingkuehling.de
   Web http://kuehlingkuehling.de

   You can contact our customer service for questions, complaints and
   objections on workdays from 8:00am to 4:00pm
   by phone +49 (0) 431 98 35 24 73 – 0
   by fax +49 (0) 431 98 35 24 73 16
   or via email care@kuehlingkuehling.de.

    3. Reseller registration

   An application form for the authorization as a reseller can be requestet
   via e-mail at sales@kuehlingkuehling.de.

    4. Prices, discounts, rebates and shipping costs

   4.1 The prices stated on the product pages do not specify the legal VAT.
   All further price shares are specified. If legally applicable, the margin
   scheme and taxes incurred are stated for used goods/articles.

   4.2 Discounts and further rebates previously require an explicit
   agreement. Such an agreement cannot be derived from discounts or rebates
   we granted to the customer for previous deliveries. Discounts and rebates
   have to be newly agreed for every contract, unless otherwise agreed with a
   customer in terms of a framework agreement. Also, discount and rebate
   agreements cannot be derived from the fact that we do not object a
   customer’s deduction not previously agreed. An agreed discount can only be
   claimed if no payment of other orders is outstanding.

   4.3 In addition to the stated prices we charge shipping costs. The
   shipping costs can be clearly identified on the produc pages and on the
   order pagel as far as this is possible regarding the kind of goods, the
   shipping method and the destination country. In any other case shipping
   costs must be agreed individually.

   4.4 No further costs and taxes will be incurred for sales within Germany
   and coutries of the EU. Sales to other countries or regions may be subject
   to local import provisions and thus additional charges may apply (e.g.
   import sales tax, tariffs, etc.).

   4.5 „Payment in advance“ is considered agreed.

    5. Delivery

   5.1 The following applies in addition to the delivery conditions stated in
   the GTC:
   We are entitled to make partial deliveries if not otherwise explicitly
   agreed. The reseller may only decline to accept partial deliveries if
   these are of no objective interest to him. The decline has to be made in
   writing, including a written statement justifying the lack of objective
   interest.

   5.2. Costs arising from partial deliveries made upon the customer’s
   request will be charged additionally; this also applies if generally (in
   case of a single delivery) no separate shipping costs have been agreed.

    6. Payment

   6.1 Payment is made by „payment in advance“. If „Payment on delivery“ has
   been agreed individually, this is stated in the accompanying quote.

   6.2 For payment in advance we will include our bank details in the order
   confirmation and will ship the products within the stated delivery time
   after we have received payment.

   6.3 You only have an enforceable right to offset in case that your
   counter-claims are undisputed, legally enforceable or ready for judgment
   or if they are in accordance with § 320 BGB.

   6.4 You only have a right of retention insofar the claims result from the
   same contractual relationship.

    7. Customer damage compensation claims

   7.1 Claims for damage compensation or reimbursement of expenses of the
   reseller’s customers resulting from defects that are not excluded by the
   preceeding agreements or by Number 7.2 become time-barred within 12 month.

   7.2 All other damage compensation or reimbursement of expenses claims – to
   the exception of those named under Number 7.3 – are excluded irrespective
   of their legal grounds, especially when resulting from breach of duties or
   tortius actions.

   7.3 Damage compensation claims resulting from:
   a) Damages resulting from the destruction of life, personal injury or
   health damages due to negligent violation of duty by us or intentional or
   negligent violation of duty by our legal representatives or our vicarious
   agents.
   b) Other damages due to negligent violation of duty by us or intentional
   or negligent violation of duty by our legal representatives or our
   vicarious agents.

    8. Warranties

   8.1 All descriptions and other details provided by us, including
   catalogues, brochures and advertising material are only – if not
   explicitly stated otherwise – descriptions. We do not guarantee properties
   or quality of goods or that a specific consistency is maintained for a
   specific period.

   8.2 If we, by derogation from Number 8.1, have assumed a warranty, the
   customer is entitled to claim warranty to the extent of the warranty in
   case of defects that are subject to this warranty (especially in case of
   the absence of a guaranteed condition).

  Notes on the obligation of information about the different technical steps to
  follow to conclude a contract, acc. to § 312i Para. 1 No. 1 BGB i.c.w. Art.
  246c No. 1 EGBGB

   According to § 312i Para. 1 No. 1 BGB i.c.w. Art. 246c No. 1 EGBGB, we are
   obliged to inform about different technical steps to follow to conclude a
   contract.

   We point out that the menu guiding through the offers in our webshop leads
   to a completion of the ordering process in a self-explanatory way via
   notes and/or buttons such as „Continue“, „Proceed to order form“ etc.

  Notes on the obligation of information about the storage of the treaty text,
  acc. to § 312i Para. 1 Nos. 2,4 BGB i.c.w. Art. 246c No. 2 EGBGB

   According to § 312i Para. 1 Nos. 2,4 BGB i.c.w. Art. 246c No. 2 EGBGB are
   we obliged to inform whether the treaty text is stored by us after
   conclusion and if the treaty text is accessible to the customer.

   We point our that the offers visible in our webshop are stored for 30 days
   after conclusion of the ordering process and that they are accessible and
   printable via the URL http://kuehlingkuehling.de/order-tracking using the
   ordering number (see order confirmation email) as well as the email
   address used during purchase. After this period has expired, the offer is
   permanently deleted from the webshop. We keep a printed version of this
   offer which can be viewed/requested after expiration of the deadline.
   However, we recommend that our customers print the treaty text/offer
   directly after conclusion of the contract.

   Regarding our GTC, we emphasize that these are constantly subject to
   change. Older versions of the GTC will not be stored after an update and
   are only available as a specimen copy. We recommend that our customers
   print the GTC directly after conclusion of the ordering process.

  Note on the obligation to inform about possibilities to to identify and
  correct handling errors acc. to § 312i Para. 1 Sentence 1 No. 1 BGB i.c.w.
  Art. 246c No. 3 EGBGB

   We would like to explicitly state that all inputs can be checked again at
   any time, especially after clicking the purchase button. You can correct
   any entry by use of the the „back“ button or closing the last opened
   window using the X symbol.

  Privacy statement

   We, the Kühling&Kühling GmbH, Christianspries 30, 24159 Kiel, Germany, –
   referred to in the following as Company – observe the rules of respective
   data protection laws and therefor take the protection of your personal
   data very seriously, to your benefit also. Personal data is only collected
   in the amount technically relevant, e.g. for concluding a contract.
   Neither will collected data be used outside the company nor sold or made
   accessible to third persons in any way unless mandatory for the contract
   conclusion.

   We note that our website’s server automatically collects and stores log
   file information that yout browser provides (to us). These are:
   – Browsertype/-version,
   – OS used,
   – Referrer URL (the previously visisted page),
   – Hostname of the accessing computer (IP address),
   – Time of server inquiry.

   These data are not accessible to our employees.

   Any personal data will only be colleted if you yourself state them
   voluntarily during the process of ordering goods, opening a customers
   account or registering for our newsletter
   We use the data that you have provided without your separate consent
   exclusively for the purpose of fulfilling and processing your order. Your
   data is blocked after the complete contract arrangement and payment has
   been fully received and deleted after expiry of the provisions under
   fiscal and commercial law. After the contract has been fully conluded and
   the payment has been completely received your data will be locked from
   further usage and will be deleted after expiration of German commercial
   law and tax law regulations.

   Passing your data is to the shipping company responsible for supply, to
   the extent necessary for the delivery of the goods needed. For the
   processing of payments we must pass on the relevant data to the authorized
   banking institution.

   You have the right to be provided with information free of charge on
   personal data stored, its origin and recipient, the legal grounds for its
   storage, blocking or deletion of data and the revocation of permission
   given and the purpose for which the data is processed. Information on the
   stored data provides the data security engineer, Mr. Simon Kühling, Im
   Wiesengrund 23, 24113 Molfsee, Germany, phone +49 (0) 431 98 35 24 73 – 0,
   fax +49 (0) 431 98 35 24 73 16, e-mail office@kuehlingkuehling.de.

  Notes on sales packagings

   Sales packaging is packaging that arrives at the customer’s
   (§ 3 Para. 1No.2 Packaging Ordinance). Manufactureres and distributors of
   products are obliged either
   – to take back packaging waste free of charge directly at the shop or in
   the immediate surroundings (§ 6 Para. 1) (so called self-disposal
   solution) or
   – to participate in a global collecting system which collects packaging
   waste directly or nearby  the end customer (so called dual systems)
   Therefor you have the right to send back emptied packagings free of charge
   to the address stated in the imprint.

  Information obligation in accordance with the battery law – BattG

   According to the law on placing on the market, the collection, the
   recovery and the environmental friendly disposal of batteries and
   accumulators (battery law – BattG) of 25 June 2009 (BGBl. I S. 1582) we as
   distributor are obliged to inform you about the respective rules and
   obligations. You will receive the notes prescribed by the BattG together
   with the goods delivery.

   You can return used batteries provided by us free of charge.

   According to §11 BattG, end customers are legally obliged to return used
   batteries but without being obliged to distinguish the type of battery or
   the manufacturer of distributor.

   Batteries must not be disposed of via household garbage but have to be
   returned to the distributor or to a provided disposal point designated by
   the public disposal provider.

   Batteries containing hazardous substances are marked with a crossed-out
   trash bin. Below that is the chemical label of the hazardous substance,
   being „Cd“ for Cadmium, „Hg“ for Mercury and „Pb“ for lead.

   Consumer, commercial or other economic enterprise or public entity may
   agree on the location of the return with the Community withdrawal system
   as well as with manufacturers, that have established their own system.

   © 2015 Rechtsanwalt Ralph J. Jurisch, 59387 Ascheberg/Westf., for
   www.webrecht-jurisch.de

   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                     The VP75 Additive Manufacturing System

  Massive build volume

  Enhanced FFF 3D printing technology and full process automation

  Outstanding ease of operation

  Including 12 months extended warranty, 24/36 months service contracts
  available including maintenance, technical support and on-site service

   Request a Quote
   VP75

   Our new large scale, high volume production unit. Processing
   engineering-grade materials in small- to mid-scale batches has never been
   as straightforward and economic.

Features

   Massive 75L Build Volume (Ø400x600mm)

   High Volume Output – up to 100g/h Material Deposition

   Precisely heated and controlled build environment

   High-performace print head for engineering-grade materials

   ClogSense print head performance live analysis

   ActuProbe 100% self-calibration technology

   VacuFlat simple-exchange build surface fixation technology –
   continuous-use PEI sheet included; also accepts wide variety of
   substituting build surface materials up to 3mm thickness

   Advanced on-board system diagnostics and process monitoring

   Large integrated 10″ graphical touchscreen user interface

   Attractive exterior design

   24/36 months service contracts available including maintenance, technical
   support and on-site service

   VP75 Display

Specifications

   3D printing technology Fused Filament Fabrication (FFF)
                          Minimum layer thickness approx. 0.05mm (resolutions
   Print Resolution       below 0.10mm are dependend on installed nozzle
                          diameter, used print material etc.; some materials
                          of low viscosity may even allow thinner layers)
                          Ø1.75 +/- 0.05mm
   Filament
                          Filament spool storage in comfortably accessible
                          big drawer at bottom of machine
   Build Volume           Ø400x600mm (75 liter)
                          Engineering plastics such as Polymaker Industrial
                          PC & PA filaments and Kühling&Kühling brand
   Model Materials        filaments. Please contact us, our application
                          consulting team will review your exact material
                          requirements individually!
                          High temperature print head (500°C max.); Ø0.50mm
   Print Head             nozzle pre-installed; Ø0.75/1.00mm nozzle diameters
                          available separately
                          Heated (up to 150°C)

   Print Table            VacuFlat simple-exchange vacuum build surface
                          fixation technology – continuous-use PEI sheet
                          included; also accepts wide variety of substituting
                          build surface materials up to 3mm thickness
   User Interface         Integrated 10″ capacitive touch screen controller
                          for stand-alone operation
   Network Connection     Ethernet 10/100, RJ45

   Automatic Calibration ActuProbe 100% self-calibration technology,
                         autonomously performed prior to every print job
   Chamber               Actively heated build environment (up to 80°C) for
                         durable prints from engineering plastics
   Enclosure             Rigid sheet-metal frame, fully enclosed; large
                         acrylic glass door; built-in LED lighting
   Software              Free and Open Source slicing software, optimized
                         configuration presets provided
   Operating Systems     Windows, Mac OS X, Linux
   Power Requirements    230V AC 16A, compressed air 6-8bar 80l/min
   Dimensions            approx. 80x74x220cm (WxDxH)
   Weight                approx. 250kg
   Included in Delivery  Tool set, Polymaker PC-Max white model material á
                         750g, EU power cord
   Warranty Terms        12 months extended warranty
   Shipping              Fully assembled and tested with CE conformity
   Optional Accessories  Additional print head nozzles in various diameters
                         (Ø0.50/0.75/1.00mm), additional build sheets

   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                         Warranty Terms and Conditions

   You are here:

    1. Home
    2. Warranty Terms and Conditions

   These are our German Warranty Terms and Conditions. An english translation
   is attached below.

  Garantiebestimmungen der Kühling&Kühling GmbH

   Sehr geehrte Kundin,
   sehr geehrter Kunde,

   unsere Produkte unterliegen einer strengen Qualitätskontrolle. Sollte ein
   Produkt dennoch nicht einwandfrei funktionieren, bedauern wir dies sehr
   und bitten Sie, sich direkt an unseren technischen Support zu wenden:

   E-Mail: support@kuehlingkuehling.de

   Zusätzlich zur gesetzlichen Gewährleistung gewähren wir Ihnen für
   bestimmte, von uns gekennzeichnete Produkte eine erweiterte Garantie nach
   Maßgabe der nachfolgenden Garantiebestimmungen:

   1. Die Kühling&Kühling GmbH garantiert die Mängelfreiheit, Nutzbarkeit,
   Verarbeitung und Haltbarkeit der verwendeten Materialien im jeweiligen
   Garantiezeitraum.

   2. Der Garantiezeitraum beginnt mit dem Rechnungsdatum des Produkts und
   gilt in der gesamten Europäischen Union. Die genaue Garantiezeit ist aus
   der Produktbeschreibung oder dem individuellen Angebot ersichtlich.

   3. Garantieansprüche müssen unverzüglich nach Kenntniserlangung des
   Defekts innerhalb der Garantiezeit geltend gemacht werden.

   4. Einen berechtigten Garantieanspruch behebt die Kühling&Kühling GmbH
   nach Ermessen, kostenlos, durch Reparatur oder Austausch im
   Garantiezeitraum. Beim Austausch wird das alte Produkt durch ein Produkt
   gleicher Art, gleicher Güte und gleichen Typs ersetzt. Sofern das
   betroffene Produkt zum Zeitpunkt der Fehleranzeige nicht mehr hergestellt
   wird, ist die Kühling&Kühling GmbH berechtigt, ein ähnliches Produkt zu
   liefern. Ausgetauschte Geräte oder Teile von Geräten gehen in das Eigentum
   der Kühling&Kühling GmbH über. Die Garantieleistungen bewirken weder eine
   Verlängerung der Garantiezeit, noch setzen sie eine neue Garantie in Gang.

   5. Garantieansprüche sind ausgeschlossen bei Schäden durch:

     • unsachgemäße Handhabung
     • normale Abnutzung
     • Einwirkung von Chemikalien
     • höhere Gewalt
     • Eingriffe, die nicht von unserem technischen Service vorgenommen
       wurden
     • eigenmächtige Reparaturversuche
     • Nichtbeachtung der Bedienungsanleitung
     • Nichtbeachtung der für das Produkt geltenden Sicherheitsvorkehrungen
     • Gewaltanwendungen (z.B. Schlag, Stoß, Fall)
     • Einsendung in nicht transportsicherer Verpackung

   Darüber hinaus sind Zubehörteile, die nicht zur Grundausstattung des
   Produkts gehören, von der Garantie ausgeschlossen.

   6. Bei einem berechtigten Garantiefall kontaktieren Sie bitte stets
   unseren Kundenservice, um das individuelle Vorgehen und eine eventuelle
   Versandlogistik in Ihrem Fall abzustimmen:

   E-Mail: care@kuehlingkuehling.de

   7. Die gewährte Garantie steht Ihnen neben den gesetzlichen Rechten zu und
   berührt diese nicht.

  English translation:

    

  Warranty Terms and Conditions

   Dear Customer,

   Our products are subject to strict quality control. However, if you find
   that you have a product that does not work correctly, please contact our
   technical support team directly:

   Email: support@kuehlingkuehling.de

   In addition to the statutory warranty, Kühling&Kühling offers an extended
   warranty for certain, designated products according to the following
   warranty terms and conditions:

   1. Kühling&Kühling guarantee that the products are free from defects in
   material, manufacturing and construction.

   2. The warranty period starts with the invoice date of the product and is
   valid throughout the European Union. The exact warranty period is
   specified on the respective product page or estimate.

   3. Warranty claims must be reported immediately after you have become
   aware of the defect and within the warranty period. The product should not
   be used further if thought to be any risk to health or will cause further
   damage.

   4. Kühling&Kühling fulfils any valid warranty claim within the warranty
   period, free of charge, through repair or replacement. In case of a
   replacement, the old product is replaced by a product of the same kind,
   quality and type. If the affected product is no longer produced at the
   time the issue occurs, Kühling&Kühling is entitled to deliver a similar
   product. The old replaced devices or parts shall become the property of
   Kühling&Kühling. Warranty replacements, or repaired units, do not extend
   the original warranty period nor do they initiate a new warranty.

   5. The warranty does not apply to damages caused by:

     • Incorrect handling by the user
     • Normal wear and tear
     • Exposure to chemicals, water ingress, heat or prolonged direct
       sunlight
     • Force majeure
     • Repairs that were not performed by our authorized technical service
       partners
     • Unauthorized attempts to repair
     • Non-compliance of the operating instructions
     • Non-compliance of the product-related safety regulations
     • Maltreatment (e.g. knocks, shocks or drops)
     • Returned in unsuitable packaging which does not protect the device

   Optional accessories, which are not included in the basic equipment of the
   product, are also excluded from the warranty.

   6. In case of a valid warranty claim, please always get in contact with
   our customer care team in order to coordinate the individual procedure and
   potential shipping logistics:

   E-Mail: care@kuehlingkuehling.de

   7. The warranty offered is in addition to your statutory warranty and does
   not affect your legal rights.

   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                 Discover the new Kühling&Kühling product line!

   VP75

  VP75 Additive Manufacturing System

   Our new large scale, high volume production unit. Processing
   engineering-grade materials in small- to mid-scale batches has never been
   as straightforward and economic.

   Request a Quote More

   HT500.2

  HT500.2 3D Printer

   Introducing the 2nd generation of our proven 3D printer for engineering,
   research and development.

   Request a Quote More

                                    Contact

  Call Us:

   +49 431 98 35 24 73 – 0

   Daily from 9.00 am to 4.00 pm CET

  Mail Us:

   sales@kuehlingkuehling.de

  Newsletter

   Email * _____________________ _____________________

   [ Subscribe! ]

                                 Our Customers

   logo_siemens
   logo_uni-tuebingen
   logo_zhaw
   logo_fraunhofer-ifam
   logo_alpha-xrt
   titk_logoclaim_de

                                      News

   All posts
   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                                    About Us

   You are here:

    1. Home
    2. About Us

   Packaging 1

   Kühling&Kühling focuses on Open Source Hardware development and
   manufacturing, running its own manufacturing facility in Kiel, Germany.
   While incorporating high quality craftmanship for assembly and quality
   management, we make extensive use of Direct Digital Manufacturing
   technology for building our products. Wherever possible we choose digital
   processes like Additive Manufacturing/3D printing for producing fully
   functional parts in series to be assembled into our products, as well as
   lasercutting or CNC routing. The entire manufacturing process is highly
   digitized with full paperless control and task and warehouse management,
   all this keeps Kühling&Kühling extraordinarily scaleable to quickly grow
   along rising demands.

   Our most popular and important products are the professional
   Kühling&Kühling 3D printers, introduced early 2013 and being manufactured
   in series since November 2013.

   Entirely committed to Open Source development for both soft- and hardware,
   we are living a communicative and open business philosophie setting great
   value on customer support and comprehensive documentation.

   Contact Us

   call5 +49 431 98 35 24 73 - 0

   mail20 sales@kuehlingkuehling.de

   About us

   Kühling&Kühling is an open source hardware company founded 2012 by Jonas
   Kühling and Simon Kühling. Read more...

   Twitter

     • RT @toms3dp: Overengineered? Naw, just like it's supposed to be done
       from a German's point of view! @FabCon3D w @kuehlingcompany
       https://t.… 6 days ago retweeted via toms3dp
     • RT @toms3dp: Brought the wrong camera charger, so I'm having an
       emergency phone to tripod adapter printed by @Kuehlingcompany here at
       @FabC… 1 week ago retweeted via toms3dp
     • #rapidtech trade fair in Erfurt/Germany is open - meet us at booth
       2-309! https://t.co/k9TVSvD8Gq 2 weeks ago
     • All phones are back online again - thank you very much for your
       patience! 4 months ago
     • Unfortunately our telephone line is temporarily down since 11:30 am.,
       but we are available via e-mail nonetheless! sales@kuehlingkuehling.de
       4 months ago
     • RT @wolffpeter: Heute #startuptour mit @c_lindner in Kiel. Danke an
       @kuehlingcompany #AdditiveManufacturing #greatcompany
       https://t.co/qlLJ… 4 months ago retweeted via wolffpeter
     • We're launching our new VP75 Additive Manufacturing System live on
       @formnext_expo this week! #formnext16 https://t.co/yy4PQDZmbZ 8 months
       ago
     • Polycarbonate from @Polymaker_3D (PC Plus) breaks like a molded part
       when printed on a HT500 3D printer #insane https://t.co/Et4DUqrQoH 1
       year ago

   Follow kuehlingcompany on Twitter

   Subscribe to our Newsletter

   Email * _____________________ _____________________

   [ Subscribe! ]
   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                                      Blog

   You are here:

    1. Home
    2. Blog

   Sep282015
   

  TCT Show, 30 Sept – 1 Oct 2015, NEC Birmingham/UK

   FairBy Simon Kühling28. September 2015Leave a comment

   Our next stop for this year’s trade show tour is Birmingham/UK this week:
   As one of the world’s leading events dedicated to 3D printing, additive
   manufacturing and product development, TCT Show + Personalize will without
   doubts assemble an interesting and diverse lineup of exhibitors. Catch up
   on our latest developments and get some first-hand impressions…

   Details
   Sep172015
   

  Strength of 3D Printed Parts (Video)

   Development, News-Home, VideoBy Jonas Kühling17. September 2015Leave a
   comment

   Recently published via our Twitter channel, this short video didn’t yet
   find its way here. For the sake of completeness enjoy the following demo
   and get a glimpse of potential part strength with additive FFF 3D printing
   technology: Albeit not with pure scientific approach, the results are
   remarkable after all! You may recognize the tested…

   Details
   Sep172015
   

  Euromold 2015, September 22-25, Düsseldorf/Germany

   GeneralBy Simon Kühling17. September 2015Leave a comment

   For more than 20 years, Euromold is the world’s leading trade fair in
   product development. 2015 is the first year for Euromold to take place in
   Düsseldorf and will bring some refreshment to the overall concept of the
   fair. We are part of the show again this year, demonstrating our RepRap
   Industrial 3D Printer live –…

   Details
   Sep162015
   

  New Product: 400°C Print Heads Option

   Development, RepRap IndustrialBy Simon Kühling16. September 2015Leave a
   comment

   By default the RepRap Industrial 3D Printer is equipped with two
   full-metal print heads capable of up to 300°C operating temperature for a
   wide range of excellent 3D printing materials. These include
   thermoplastics like ABS, PLA, HIPS, PET, TPE, various composites and even
   PA12. For the really high performance plastics, though, we now have you
   covered…

   Details
   Sep162015
   

  4 Easy Steps to Start Printing with Soluble Support Material (Video)

   Development, Documentation, News-Home, VideoBy Simon Kühling16. September
   2015Leave a comment

   Just in time for this year’s trade show season, we have finalized our
   soluble support material workflow as promised earlier. To start off the
   following video will give you a quick walkthrough of a dual extrusion
   print with ABS model material and HIPS supports on the RepRap Industrial
   3D Printer. We highly recommend to give…

   Details
   Jun42015
   

  Another Sample? ABS + Soluble Support

   Development, Documentation, RepRap IndustrialBy Jonas Kühling4. June 20151
   Comment

   This is a chain link, obviously, and no matter how it is turned it will
   always be rounded at the bottom. No chance for some clever orientation for
   3D printing, no chance to sail around support material necessity. Still,
   models like this one are expeted to come out evenly round and accurate on
   all surfaces…

   Details
   Jun22015
   

  Soluble Support Material for ABS Models is here! Live on Show at Rapid.Tech
  2015, June 10-11 in Erfurt/Germany

   Development, Fair, RepRap Industrial, VideoBy Jonas Kühling2. June 20151
   Comment

   Remember the diligently promoted jaw-dropping advantages of 3D printing?
   The promise of beeing able to literally print anything, at least any shape
   and geometry that may even be unthinkable with common means of
   manufacturing? Sure it’s all mathematically provable if you don’t mind
   diggin’ into Fubini’s theorem for verification, but still there’s this
   ubiquitous gap…

   Details
   Feb202015
   

  It’s Time to Upgrade Your RepRap Industrial

   General, News-HomeBy Simon Kühling20. February 2015Leave a comment

   If you own a RepRap Industrial, this is big news for you: We just released
   an upgrade to bring all software components on your 3D printer up to the
   latest versions currently deployed in our series production. This upgrade
   is available for all hardware revisions, back to the very first machine
   that left our factory…

   Details
   Oct142014
   

  Improvements for Break-Away Support Structures with ABS Material

   Development, RepRap Industrial, SupportBy Simon Kühling14. October 20141
   Comment

   We recently challenged our team with a number of sophisticated, organic 3D
   models to print and further optimize our default slicing profiles in
   regard to break-away support performance. Since well working support
   structures can be considered the holy grail of the Fused Filament
   Fabrication (FFF) 3D printing, improvements in this field are on top of…

   Details
   Sep172014
   

  Meet us at automechanika 2014 this week (September 16 – 20), Frankfurt/Germany

   GeneralBy Jonas Kühling17. September 2014Leave a comment

   This week we are joining the 3D printing special show at automechanika
   2014 trade fair in Frankfurt/Germany, showcasing two of our brand new
   Kühling&Kühling RepRap Industrial v1.1.0 3D printers at the “3D Druck
   Sonderschau” joint booth together with Voxeljet, Fraunhofer IPA and the
   awesome folks of HypeCask. Being the world’s leading trade fair for the…

   Details
   1234
   Contact Us

   call5 +49 431 98 35 24 73 - 0

   mail20 sales@kuehlingkuehling.de

   About us

   Kühling&Kühling is an open source hardware company founded 2012 by Jonas
   Kühling and Simon Kühling. Read more...

   Twitter

     • RT @toms3dp: Overengineered? Naw, just like it's supposed to be done
       from a German's point of view! @FabCon3D w @kuehlingcompany
       https://t.… 6 days ago retweeted via toms3dp
     • RT @toms3dp: Brought the wrong camera charger, so I'm having an
       emergency phone to tripod adapter printed by @Kuehlingcompany here at
       @FabC… 1 week ago retweeted via toms3dp
     • #rapidtech trade fair in Erfurt/Germany is open - meet us at booth
       2-309! https://t.co/k9TVSvD8Gq 2 weeks ago
     • All phones are back online again - thank you very much for your
       patience! 4 months ago
     • Unfortunately our telephone line is temporarily down since 11:30 am.,
       but we are available via e-mail nonetheless! sales@kuehlingkuehling.de
       4 months ago
     • RT @wolffpeter: Heute #startuptour mit @c_lindner in Kiel. Danke an
       @kuehlingcompany #AdditiveManufacturing #greatcompany
       https://t.co/qlLJ… 4 months ago retweeted via wolffpeter
     • We're launching our new VP75 Additive Manufacturing System live on
       @formnext_expo this week! #formnext16 https://t.co/yy4PQDZmbZ 8 months
       ago
     • Polycarbonate from @Polymaker_3D (PC Plus) breaks like a molded part
       when printed on a HT500 3D printer #insane https://t.co/Et4DUqrQoH 1
       year ago

   Follow kuehlingcompany on Twitter

   Subscribe to our Newsletter

   Email * _____________________ _____________________

   [ Subscribe! ]
   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                            Category Archives: Video

   You are here:

    1. Home
    2. Category "Video"

   

  Strength of 3D Printed Parts (Video)

   Development, News-Home, VideoBy Jonas Kühling17. September 2015Leave a
   comment

   Recently published via our Twitter channel, this short video didn’t yet
   find its way here. For the sake of completeness enjoy the following demo
   and get a glimpse of potential part strength with additive FFF 3D printing
   technology: Albeit not with pure scientific approach, the results are
   remarkable after all! You may recognize the tested…

   

  4 Easy Steps to Start Printing with Soluble Support Material (Video)

   Development, Documentation, News-Home, VideoBy Simon Kühling16. September
   2015Leave a comment

   Just in time for this year’s trade show season, we have finalized our
   soluble support material workflow as promised earlier. To start off the
   following video will give you a quick walkthrough of a dual extrusion
   print with ABS model material and HIPS supports on the RepRap Industrial
   3D Printer. We highly recommend to give…

   

  Soluble Support Material for ABS Models is here! Live on Show at Rapid.Tech
  2015, June 10-11 in Erfurt/Germany

   Development, Fair, RepRap Industrial, VideoBy Jonas Kühling2. June 20151
   Comment

   Remember the diligently promoted jaw-dropping advantages of 3D printing?
   The promise of beeing able to literally print anything, at least any shape
   and geometry that may even be unthinkable with common means of
   manufacturing? Sure it’s all mathematically provable if you don’t mind
   diggin’ into Fubini’s theorem for verification, but still there’s this
   ubiquitous gap…

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                                Upcoming Events

   You are here:

    1. Home
    2. Upcoming Events

   For anyone who likes to get in contact with the heads behind
   Kühling&Kühling and get in touch with our latest 3D printers and Open
   Source Hardware developments we are exhibiting on several trade fairs over
   the year, presenting our products and services to a wide audience.

   In case you are located in the North of Germany, are travelling along or
   intend to visit the Baltic coast anyway, please also feel happily invited
   to have a stop at our HQ in Kiel – just drop us an e-mail via
   office@kuehlingkuehling.de so we can make sure to save the date for an
   appointment.

formnext 2017

   November 14 – 17, 2017
   Frankfurt am Main, DE

   formnext2017_LOGOKOMBI_OT_D_RGB
   Contact Us

   call5 +49 431 98 35 24 73 - 0

   mail20 sales@kuehlingkuehling.de

   About us

   Kühling&Kühling is an open source hardware company founded 2012 by Jonas
   Kühling and Simon Kühling. Read more...

   Twitter

     • RT @toms3dp: Overengineered? Naw, just like it's supposed to be done
       from a German's point of view! @FabCon3D w @kuehlingcompany
       https://t.… 6 days ago retweeted via toms3dp
     • RT @toms3dp: Brought the wrong camera charger, so I'm having an
       emergency phone to tripod adapter printed by @Kuehlingcompany here at
       @FabC… 1 week ago retweeted via toms3dp
     • #rapidtech trade fair in Erfurt/Germany is open - meet us at booth
       2-309! https://t.co/k9TVSvD8Gq 2 weeks ago
     • All phones are back online again - thank you very much for your
       patience! 4 months ago
     • Unfortunately our telephone line is temporarily down since 11:30 am.,
       but we are available via e-mail nonetheless! sales@kuehlingkuehling.de
       4 months ago
     • RT @wolffpeter: Heute #startuptour mit @c_lindner in Kiel. Danke an
       @kuehlingcompany #AdditiveManufacturing #greatcompany
       https://t.co/qlLJ… 4 months ago retweeted via wolffpeter
     • We're launching our new VP75 Additive Manufacturing System live on
       @formnext_expo this week! #formnext16 https://t.co/yy4PQDZmbZ 8 months
       ago
     • Polycarbonate from @Polymaker_3D (PC Plus) breaks like a molded part
       when printed on a HT500 3D printer #insane https://t.co/Et4DUqrQoH 1
       year ago

   Follow kuehlingcompany on Twitter

   Subscribe to our Newsletter

   Email * _____________________ _____________________

   [ Subscribe! ]
   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
   
   
   
   
   
   
   
   
   
   
   
   
   
   Skip to content
   sales@kuehlingkuehling.de +49 431 98 35 24 73 - 0
   Kühling&KühlingKühling&Kühling
   Kühling&Kühling
   3D PRINTING TECHNOLOGY

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

     • Products

          • VP75 Additive Manufacturing System

          • HT500.2 3D Printer

     • Blog
     • Company

          • About Us
          • Upcoming Events

     • Documentation

          • User’s Manuals
          • Videos

     • Request for Quote

                             The HT500.2 3D Printer

  Up to 30% faster

  Increased positional accuracy

  Enhanced maintainability

  Now including 12 months extended warranty, 24 months service contracts
  available including technical support and on-site service

   Request a Quote
   HT500.2

   The HT500.2 is the 2nd generation of our proven industrial Fused Filament
   Fabrication (FFF) 3D printer for high-quality results – your first choice
        for cost effective manufacturing of individual parts through to
    small-batch production. With its advanced chamber design, the 3D printer
    builds dimensionally accurate and strong objects from engineering-grade
                                   materials.

                          Two Print Heads up to 500°C

    

                        Heated Build Chamber up to 70°C

    

                          Heated Print Bed up to 130°C

   HT500 - Print Head Detail

                             Large 10L Build Volume

                                 200x180x290mm

                              Flexible Resolution

                        Layer Heights from 0.05 to 0.6mm
                      Nozzle Diameters from 0.25 to 0.75mm

Applications

   Prototyping
   Prototyping
   Architecture/ Model Making
   Architecture/ Model Making
   Creative
   Creative
   Medical Engineering
   Medical Engineering
   Printing with Soluble Support Materials
   Printing with Soluble Support Materials

Demo (Previous Version)

   IFrame

Features

                                        • 



  Stand-Alone Operation

       No dedicated computer needed, the HT500.2 features true stand-alone 3D
       printing. Access the 3D printer’s webinterface from your webbrowser
       via ethernet and upload print jobs conveniently, monitor the machine
       status and remaining time of a running print job.

                                        • 



  Intuitive Touch Screen Controller

       All operation tasks are executable with a simple touch on the 10″
       capacitive touch panel, e.g. starting a print, running calibration
       wizards etc.

                                        • 



  Quick-Exchange Nozzle Tips

       Install different nozzle diameters within seconds. The printer comes
       with 2 pcs. Ø0.35mm and 2 pcs. Ø0.5mm nozzles – more spare nozzle tips
       and sizes available separately.

                                        • 



  Empty Filament Spool Recognition

       Never fear that running out of filament may ruin that hours lasting
       print job – the printer will recognize used up filament spools and
       pause print for reloading! Even when happening mid-night, you’ll find
       your HT500.2 happily waiting for your assistance in the morning.

                                        • 



  Easy and Precise Calibration

       The print table has semi-automatic leveling with a pictured
       calibration wizard on the touch interface. Both extruder nozzles are
       precisely adjustable with automatic height alignment functionality to
       guarantee best dual extruder experience.

                                        • 



  Safety & CE Marking

       An activated carbon air filter ensures non-smell operation in office
       environments. CE Marking according to EU requirements for product
       safety – an essential criteria for our business customers.

                                        • 



  Open Source Technology

       Modify any operating parameter you can imagine like speeds,
       temperatures, resolution; do hardware or software modifications
       according to your needs if required. Power to you!

                                        • 



  Support & Spare Parts

       Get in contact with our e-mail support line any time to get assistance
       along technical issues with your HT500.2 3D Printer. Additionally
       there’s our extensive Online User’s Manual docs.kuehlingkuehling.de
       featuring in-depth technical background information, maintenance
       guidelines, general tips&tricks for improving your quality output with
       tricky 3D models, as well as troubleshooting with step-by-step
       diagnosis and solutions.

                                        • 



  Tools & Warranty Included

       Each HT500.2 3D Printer comes with a full 12-part high quality tool
       set you may require for any operational and maintenance task you could
       imagine during daily use.

       Uptime and reliability is additionally enhanced by our included 12
       months extended warranty. Supplemental 24 months service contracts are
       available.

Specifications

   3D printing         Fused Filament Fabrication (FFF)
   technology
                       Minimum layer thickness approx. 0.05mm (resolutions
   Print Resolution    below 0.1mm are dependend on installed nozzle
                       diameter, used print material etc.; some materials of
                       low viscosity may even allow thinner layers)
   Filament            Ø2.85 +/- 0.1mm
   Build Volume        200x180x290mm (10.44 liter)
                       ABS, HIPS, PC, PET(G), PVA, PLA, TPEs, composites
   Model Materials     (Wood/Metal etc.), igus Tribo Filaments, PA12* (* may
                       be limited to smaller objects)
                       Soluble support options available for ABS, PET(G),
   Support Materials   PLA, PLA-/PETG-based composites; Break-away support
                       available for any processed model material
                       Two high temperature print heads (500°C max.) for
                       multi-material, multi-color and multi-nozzle-diameter
   Print Heads         operation; comes with 4 extruder nozzle tips of 2
                       different diameters (0.35/0.50); 2 pcs. 0.35mm nozzle
                       pre-installed; more nozzle diameters available
                       separately (0.25/0.75)
   Print Head Cleaning For best results in dual material prints
   System
   Cooling             Watercooled stepper motors, print heads and LED
                       lighting; low maintenance due to closed circuit
   User Interface      Integrated 10″ capacitive touch screen controller for
                       stand-alone operation
   Network Connection  Ethernet 10/100, RJ45

   Automatic Calibration Via Touch Interface
   Chamber               Actively heated build environment (up to 70°C) for
                         durable prints from engineering plastics
   Enclosure             Rigid aluminum frame, fully enclosed with clear
                         acrylic glass; built-in LED lighting
   Print Bed             Heated (up to 130°C)
                         Exchangeable maintenance-free continuous use high
                         performance build plates, compatible with ABS, PC,
   Build Surface         PETG, HIPS, PVA, PLA, TPU, PA12 without
                         priming/pretreatment/coating; one build plate
                         pre-installed
   Activated Carbon Air  Makes printer compatible to office and living
   Filter                enviroments
   Software              Free and Open Source slicing software, optimized
                         configuration presets provided
   Operating Systems     Windows, Mac OS X, Linux
   Power Requirements    100-240V AC, 50-60Hz, 1000W max.
   Dimensions            approx. 80x60x80cm (LxWxH)
   Weight                49kg
                         12-part tool set, 2 accessory nozzle tips Ø0.5mm, 1
   Included in Delivery  accessory build plate, 2 spools ABS model material á
                         750g, 1 power cord
   Warranty Terms        12 months extended warranty
   Shipping              Fully assembled and tested with CE conformity

   Company

   Kühling&Kühling GmbH
   Christianspries 30
   24159 Kiel
   Germany

   Contact

   General Inquiries
   office@kuehlingkuehling.de

   Sales Department
   sales@kuehlingkuehling.de

   Customer Care
   care@kuehlingkuehling.de

   Technical Support
   support@kuehlingkuehling.de

   Phone
   +49 (0) 431 98 35 24 73 - 0
   Fax
   +49 (0) 431 98 35 24 16

   About Us

     • Imprint
     • Terms and Conditions
     • Warranty
     • Privacy
     • Shipping

   Kühling&Kühling © 2016. All Rights Reserved.
